NETGEAR / Orbi with the Xfinity Advanced Gateway (XB6)

What the sources say about this pairing

NETGEAR's ISP-gateway article names bridge mode as the way to use a NETGEAR router with Xfinity.

Router-side steps

1. Enable Bridge Mode on the Xfinity gateway first (see the gateway page).
2. Then install your NETGEAR or Orbi router; NETGEAR links to a separate article for installing after bridge mode is enabled.

Gateway-side steps

1. Open the Admin Tool at http://10.0.0.1 from a device on your home network (you may need to enable Admin Tool access in the Xfinity app first).
2. Sign in with username admin and the password on the gateway's bottom sticker (or your own if you changed it).
3. Go to Gateway, then At a Glance, and click Enable next to Bridge Mode.
4. Connect your own router to a gateway Ethernet port.

This pairing page restates what the ISP and the router maker documented. We haven't tested your exact router model; check its manual for the WAN/Internet port and DHCP settings.

Disclosure: some links on this page are affiliate links (marked rel="sponsored"). As an Amazon Associate I earn from qualifying purchases. It never changes a verdict, and we never state prices. How we handle this.

Don't have the router yet? Browse NETGEAR routers on Amazon (affiliate link, opens in a new tab). Check the router's WAN port speed against your plan first.

Sources and retrieval dates

1. NETGEAR: Installing a NETGEAR or Orbi router if you use an ISP gateway (vendor article, updated 2025-07-07)kb.netgear.com · read October 26, 2026
2. Xfinity: Use Bridge Mode on your wireless gatewayxfinity.com · read October 26, 2026
3. Xfinity: Overview of Xfinity WiFi Gateways and Routers (model numbers)xfinity.com · read October 26, 2026

Full Xfinity Advanced Gateway (XB6) page →